Pull the canvas off the frame then remove the leftover pieces from around the staples. You'll be left with a nice, clean frame.

Set the canvas aside and paint or stain the frame (or leave it natural!). I mixed black and brown paint with a little water and brushed it over the frame to create the look of stained wood.

Step Two: Cut Heat Transfer Vinyl

Place a sheet of heat transfer vinyl on the cutting mat with the shiny carrier sheet facing down and load the mat into the machine.

Press the flashing start button and let the machine go to work.

Step Three: Weed Images

Once cutting has finished use a weeding tool to help peel up one of the corners and remove the vinyl from around the cut designs.

Then, use the weeding tool again to remove the small pieces of vinyl from inside the letters.

Step Four: Apply Heat Transfer Vinyl To Canvas

Center the carrier sheet on the canvas making sure your leave equal margins on all sides.

Cover the carrier sheet with a teflon sheet and press over the design in sections using a hot iron for 15-20 seconds at a time.

Let the vinyl cool for 20 seconds then remove the clear carrier sheet.

Step Five: Reattach Canvas To Frame

Line the frame over over the vinyl design. I'm a total eyeballer but you could always measure the margins on each side to make sure everything is squared up nicely.

Flip the frame and canvas over while holding it in place and glue the canvas back down using a hot glue gun. Keep the canvas taut as you go around to avoid wrinkles.

Use a utility knife again to remove the excess canvas from around the edge of the frame and you're finished!

You now have a one of a kind handmade sign to display all season long.

While you're here, be sure to check out some of our other fall projects like How to Decorate Pumpkins with Vinyl Scraps which would be a great addition to your fall decor.