Step Two: Load and Cut Vinyl Decals

Place the adhesive vinyl on the cutting mat with the paper side facing down and load the mat into the machine.

Set the material to vinyl and proceed with cutting each color.

Step Three: Weed Designs

After all cuts are complete, cut around each design element with scissors to separate it from the rest of the sheet of adhesive vinyl. Then, peel away the excess adhesive vinyl from around the edges.

Use a weeding tool to remove the smaller pieces of adhesive vinyl, like the tiny letters in this Steelers logo.

Step Four: Layer Designs

Now you can start layering the different pieces to create a complete logo.

When the shapes are simple like these stars are, I place them by hand. You could use transfer tape if you wanted but I find it's easier to line up simple shapes this way.

So far, so good! Let's keep layering.

This is where transfer tape is necessary. Use a small piece to pick up and transfer the word to the white background.

Apply firm pressure with the scraper tool once you have the word lined up inside the white background. It's like putting together a vinyl puzzle!

Once you peel away the transfer tape you can't even tell that these are all separate pieces of vinyl. They fit perfectly together!

Now, cut a piece of transfer tape a little larger than your design and transfer the whole thing inside the grey circle outline.

Use the scraper tool again to attach everything together.

If you don't want to put a sticker on your car, you can always apply this decal to a tumbler, water bottle, coffee cup, or any other solid, smooth surfaced item.

Step Five: Apply Decal to Car

Clean the area where you plan to apply the decal. I chose the back windshield of my car, so I used a glass cleaning wipe to remove any dirt and debris from the area. This ensures a good stick!

Place the decal on the window and use the scraper tool to push out any creases or bubbles.

Peel away the transfer tape and you're finished!

Now you're ready to show your team spirit everywhere you go! If you want to make more sports team swag, check out our DIY Super Bowl Project Idea: How to Layer Heat Transfer Vinyl on a Fleece Blanket and DIY Bag Game Project Idea: How to Apply Glitter Adhesive Vinyl on an Aluminum Pretzel Tin posts.

Craftables permanent adhesive vinyl is a high-quality adhesive vinyl that will stand up to the elements and continue looking great for years. However, if you need to remove the decal for any reason simply peel it off and wash away any residue with soapy water.